NAVIGATION
QUICK INQUIRY
Zhao, Jin, et al. Open Ceramics. 2022 Mar 1;9:100212.
Triethanolamine dodecyl sulfate (TLS) was used to hydrophobically modify high solid content alumina slurry to prepare foam ceramics with high closed porosity and high strength.
Ceramic foam preparation
· Alumina slurries were prepared by adjusting the pH value with HCl and ball milling for 1 h.
· Then TLS (relative to the mass of alumina powder) was added into the slurries and mixed by ball milling for 1 h.
· Wet foams were obtained by mechanical stirring with a kitchen mixer at 600 rpm for 4 min.
· The foams were cast into plastic molds, demolded after 2~10 h of setting, and dried at room temperature for 2 days.
· Finally, alumina ceramic foams were obtained by thermal treatment with a heating rate of 1 °C/min and holding at 1600 °C for 3 h in muffle furnace.
What is the product name of CAS number 139-96-8?
The product name is Triethanolamine Lauryl Sulfate.
What is the synonym for Triethanolamine Lauryl Sulfate?
The synonym is TEA-lauryl sulfate.
What is the molecular weight of Triethanolamine Lauryl Sulfate?
The molecular weight is 415.59.
What is the molecular formula of Triethanolamine Lauryl Sulfate?
The molecular formula is C18H41NO7S.
What is the IUPAC name of Triethanolamine Lauryl Sulfate?
The IUPAC name is 2-[Bis(2-hydroxyethyl)amino]ethanol;dodecyl hydrogen sulfate.
What is the SMILES notation for Triethanolamine Lauryl Sulfate?
The SMILES notation is CCCCCCCCCCCCOS(=O)(=O)O.C(CO)N(CCO)CCO.
What is the InChI key for Triethanolamine Lauryl Sulfate?
The InChI key is InChI=1S/C12H26O4S.C6H15NO3/c1-2-3-4-5-6-7-8-9-10-11-12-16-17(13,14)15;8-4-1-7(2-5-9)3-6-10/h2-12H2,1H3,(H,13,14,15);8-10H,1-6H2
How does the density of Triethanolamine Lauryl Sulfate compare to water?
The density is 1.13g/ml, which is slightly higher than the density of water.
What is the physical state of Triethanolamine Lauryl Sulfate?
It is in liquid form.
Can you provide the CAS number for Triethanolamine Lauryl Sulfate?
The CAS number is 139-96-8.
